Installation
Lenox® Lockers
(includes
Cubby & “Z” Lockers)
P.O. Box 309, Menomonee Falls, WI 53052-0309
TEL. 1-800-BRADLEY
FAX 262-253-4161
www.bradleycorp.com
LK-INSTR-001 Rev. K; EN 07-1303
© 2007 Bradley Corporation
Page 1 of 15
10/24/07
WARNING
Read this installation manual completely to ensure proper installation, then file it with the
owner or maintenance department.
Separate parts from packaging and make sure all parts are accounted for before discarding
any packaging material. If any parts are missing, do not begin installation until you obtain
the missing parts.
Lockers should be installed in a climate-controlled environment and shielded from direct
sunlight. All lockers must be either secured against a wall or installed back-to-back (for
island configuration).
Make sure all floors and walls are clean and smooth. Remove loose impediments, such as
protruding nails, and other debris which could affect installation. The lockers must be
square AND level AND floor-supported or they will not operate properly (a locker that is
square may not be level so be sure to check both).
Review your locker layout drawings and verify the number of lockers and components
before beginning installation.
Carefully lift lockers at the base when moving and positioning. Do not drag the lockers!
Lockers and slope top components are extremely heavy and may require more than one
person to position and install.
Standard lockers are shown in most illustrations. Cubby lockers and “Z” lockers are
similar and are installed in the same manner.
OPTIONAL LOCKER BASE MUST BE SQUARE AND LEVEL, AND ANCHORED TO THE
FLOOR BEFORE LOCKERS ARE INSTALLED. THE LOCKERS WILL NOT OPERATE
PROPERLY IF THE BASE IS NOT SQUARE AND LEVEL AND NOT FLOOR-SUPPORTED. A
LOCKER BASE THAT IS SQUARE MAY NOT BE LEVEL SO BE SURE TO CHECK BOTH!
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY
AND/OR PROPERTY DAMAGE AND WILL VOID THE LOCKER WARRANTY.
Product warranties may be found under ”Product Information” on our web site at
www.bradleycorp.com.
U.S. Patent Nos. 6,685,285
6,792,661
6,793,299
7,029,078
7,223,317
7,278,695
