60
Right Rear Roller Bolt
Drive Pulley Bolt
Left Side Bearing Plate Rear Plate
14. Using a 5 mm hex wrench, remove the Belt Tensioning Screws
and Brackets from the Front Roller.
NOTE:
Be sure to record how many turns it takes to remove the
screws to assist with reassembly. Also note the orientation of the
Brackets. The larger Bracket is to the outside of the machine.
15. Remove the Front Roller from the belt.
16. While holding a 13 mm (1/2”) wrench on the Right Rear Roller
Bolt steady, turn another 13 mm (1/2”) wrench on the Drive Pulley
Bolt counter-clockwise. Remove the Drive Pulley.
17. Remove the 2 bolts from the Rear Plate using a 5 mm hex wrench.
18. Remove the 2 bolts from the Left Side Bearing Plate using two 13 mm
(1/2”) wrenches.
