21
5.4. ADAPTING SUCTION FLOW RATE
To adapt the suction flow rate:
1. Use the suction flow rate control as described
in Table 3.
Do not use the roller clamp of the stone catcher to
adapt the suction flow rate.
5.5. STARTING TREATMENT
1. Go to the
READY
screen to start the treatment.
2. Press the pedal halfway (STEP 1) to activate the
suction.
3. Press the pedal completely (STEP 2) to activate both
suction and the energies.
4. Release STEP 2 to deactivate energies.
5. Release STEP 1 to deactivate suction.
Refer to the Functional Tests section for pedal use.
After 1 minute of inactivity, the system automatically
executes a purge and stops cooling the circuit. It
is reactivated when you push the pedal.
Содержание Swiss LithoCast Trilogy FT-235
Страница 2: ...2 ...
