Boss JamStation JS-5, Руководство пользователя

Страница: 100 / 160

100
Chapter 7 Changing Effect Settings
LEVEL L (Left Level) 0–127
Specify the volume of the left delay sound.
LEVEL R (Right Level) 0–127
Specify the volume of the right delay sound.
HF DAMP (High-Frequency Damp)
200–8000 Hz, BYPASS
Specify the frequency at which the high frequency range of
the delayed sound returned to the input will be cut.
If you do not want the sound to be cut, select BYPASS.
LOW GAIN -15–+15 dB
Specify the gain (amount of boost or cut) for the low
frequency range.
Positive (+) settings will emphasize (boost) the low
frequency range.
HI GAIN (High Gain) -15–+15 dB
Specify the gain (amount of boost or cut) for the high
frequency range.
Positive (+) settings will emphasize (boost) the high
frequency range.
BALANCE (Effect Balance) D100:0E–D0:100E
Specify the volume balance between the original sound and
the delay sound.
With a setting of D100:0E only the original sound will be
output, and with a setting of D0:100E only the delay sound
will be output.
LEVEL (Output Level) 0–127
Specify the output volume.
4-TAP-DLY (Quadruple Tap Delay)
Quadruple-tap-delay provides four delays. The delay time
for each delay can be specified as a note length relative to a
specific tempo.
fig.RE07-120a
The stereo location of each delay sound is as follows.
fig.RE07-120b
DELAY 1 (Delay Time 1)
200–1000 ms/
/ / / / / / / / /
Specify the delay time from the original sound until the delay
1 sound is heard.
* When set as a note value, the Delay Time can be synchronized
with the module’s internal clock or the MIDI clock arriving
from an external device. For details, refer to “3-TAP-DLY.”
* When a note value has been selected as the setting, and the
tempo is slowed so much that the resulting delay time exceeds
the permissible range, the actual delay time will be 1/2, 1/4,
1/8... of the selected note values, in keeping with the tempo in
use at that time.
DELAY 2 (Delay Time 2)
200–1000 ms/
/ / / / / / / / /
Specify the delay time from the original sound until the delay
2 sound is heard.
DELAY 3 (Delay Time 3)
200–1000 ms/
/ / / / / / / / /
Specify the delay time from the original sound until the delay
3 sound is heard.
DELAY 4 (Delay Time 4)
200–1000 ms/
/ / / / / / / / /
Specify the delay time from the original sound until the delay
4 sound is heard.
LEVEL 1 (Level 1) 0–127
Specify the volume level of delay 1.
LEVEL 2 (Level 2) 0–127
Specify the volume level of delay 2.
LEVEL 3 (Level 3) 0–127
Specify the volume level of delay 3.
LEVEL 4 (Level 4) 0–127
Specify the volume level of delay 4.
FEEDBACK -98–+98%
Specify the proportion (%) of the delay sound that is to be
returned to the input.
Positive (+) settings will return the sound to the input with
the original phase, while negative (-) settings produce an
inverted phase.
HF DAMP (High-Frequency Damp)
200–8000 Hz, BYPASS
Specify the frequency at which the high frequency range of
the delayed sound returned to the input will be cut.
If you do not want the sound to be cut, select BYPASS.
L in
R in
L out
R out
Quadruple Tap Delay
Balance E
Balance D
Balance E
Balance D
Delay 1
Delay 2
Delay 3
Delay 4
Feedback
1
2 3
4
L
R