291
MIDI Implementation
Appendices
❍
General Purpose Controller 6 (Controller number 81)
Status
2nd byte
3rd byte
BnH
51H
vvH
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
vv = Control value:
00H - 7FH (0 - 127)
❍
General Purpose Controller 7 (Controller number 82)
Status
2nd byte
3rd byte
BnH
52H
vvH
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
vv = Control value:
00H - 7FH (0 - 127)
❍
General Purpose Controller 8 (Controller number 83)
Status
2nd byte
3rd byte
BnH
53H
vvH
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
vv = Control value:
00H - 7FH (0 - 127)
❍
Portamento control (Controller number 84)
Status
2nd byte
3rd byte
BnH
54H
kkH
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
kk = source note number:
00H - 7FH (0 - 127)
❍
Effect 1 (Reverb Send Level) (Controller number 91)
Status
2nd byte
3rd byte
BnH
5BH
vvH
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
vv = reverb send level:
00H - 7FH (0 - 127)
❍
Effect 3 (Chorus Send Level) (Controller number 93)
Status
2nd byte
3rd byte
BnH
5DH
vvH
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
vv = chorus send level:
00H - 7FH (0 - 127)
❍
RPN MSB/LSB (Controller number 100, 101)
Status
2nd byte
3rd byte
BnH
65H
mmH
BnH
64H
llH
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
mm = upper byte (MSB) of parameter number specified by RPN
ll = lower byte (LSB) of parameter number specified by RPN
●
Program Change
Status
2nd byte
CnH
ppH
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
pp = Program number:
00H - 7FH (prog.1 - prog.128)
*
Transmitted according to the content of the SMF during playback of SMFs.
*
When the MIDI parameter Effects Program Chg. is set to PC ONLY or PC+BANK, this is
transmitted via the MIDI channel selected in the Effects Channel setting when insert
effects patches are switched.
*
For the correspondence between Bank Select/Program numbers and the insert effect
patch banks/numbers, see p. 288.
●
Channel Pressure
Status
2nd byte
DnH
vvH
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
vv = Channel Pressure:
00H - 7FH (0 - 127)
*
Transmitted according to the content of the SMF during playback of SMFs.
●
Pitch Bend Change
Status
2nd byte
3rd byte
EnH
llH
mmH
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
mm, ll = Pitch Bend value:
00 00H - 40 00H - 7F 7FH (- 8192 - 0 - +8191)
*
Transmitted according to the content of the SMF during playback of SMFs.
■
Channel Mode Messages
*
Transmitted according to the content of the SMF during playback of SMFs.
●
All Sound Off (Controller number 120)
Status
2nd byte
3rd byte
BnH
78H
00H
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
●
Reset All Controllers (Controller number 121)
Status
2nd byte
3rd byte
BnH
79H
00H
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
●
All Notes Off (Controller number 123)
Status
2nd byte
3rd byte
BnH
7BH
00H
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
●
Omni Off (Controller number 124)
Status
2nd byte
3rd byte
BnH
7CH
00H
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
●
Omni On (Controller number 125)
Status
2nd byte
3rd byte
BnH
7DH
00H
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
●
Mono (Controller number 126)
Status
2nd byte
3rd byte
BnH
7EH
mmH
n = MIDI channel number:
0H - FH (ch.1 - ch.16)
mm = mono number:
00H - 10H (0 - 16)
●
Poly (Controller number 127)
Status
2nd byte
3rd byte
BnH
7FH
00H
n = MIDI channel number:
0H - FH (ch.1 - 16)
■
System Common Messages
●
Quarter Frame Messages
Status
Second
F1H mmH (= 0nnndddd)
nnn = Message type:
0 = Frame count LS nibble
1 = Frame count MS nibble
2 = Seconds count LS nibble
3 = Seconds count MS nibble
4 = Minutes count LS nibble
5 = Minutes count MS nibble
6 = Hours count LS nibble
7 = Hours count MS nibble
dddd = 4 bit nibble data:
0H - FH (0 - 15)
*
If the Sync parameter “Sync Generator” is set to “MTC,” quarter frame messages of the
time code type specified by “MTC Type” will be transmitted when the BR-1600CD is
running (recording or playing). The transmitted time counts are summed to “SMPTE
(MTC) Offset Time” as the song top is “00:00:00:00”.
Bit Field is assigned as follows.
Frame Count
xxxyyyyy
xxx
Reserved (000)
yyyyy
Frame No. (0-29)
BR-1600_R_e.book 291 ページ 2007年12月6日 木曜日 午前9時52分
Содержание Digital Recording Studio BR-1600 CD
