manualshive.com logo in svg

Bosch Servodyn-D Series, Руководство пользователя

Поделиться
Скачать
Bosch Servodyn-D Series Скачать руководство пользователя страница 59

Initial commissioning

5–2

1070 066 091-102 (01.08) GB

Functionality

Your value

Default value

Relevant parameters

Maximum acceleration:

Maximum acceleration capacity, symmetrical for both directions.

S-0-0138 Acceleration bipolar

(changeable in phase 3/4)

3000 rad/s

2

(weighting iaw S-0-0160)

Behavior after ”Drive off” or a fault:

You may choose between:

D

”Halting in shortest possible time” (S-0-0138)

D

”Halting with ramp” (S-0-0260)

D

””Setpoint-controlled halting by master”

The torque will remain active for the duration of the ”Waiting time drive
off” (S-0-0207).

P-0-0004 Halting mode with drive off

(changeable in phase 2)

0b0000.0000.0000.0000
(= in shortest possible time)

Behavior after removal of the external drive enable signal:

You may choose between:

D

”Halting without setpoint control”

D

”Effect depends on P-0-0004” 
(the torque will remain active for the duration of the ”Waiting time drive
off” (S-0-0207)).

P-0-0125 Control word ext. Enable

(changeable in phase 2)

0b0000.0000.0000.0000
(= effect depends on P-0-0004)

Holding brake:

”Waiting time drive on” accounts for the time required for releasing the
brake, thus preventing excessive wear:

D

The ”Drive on” 

and 

”Drive enable” signals will first activate the torque,

depending on P-0-0505 (Plug brake enable delay).

D

The drive will not follow the setpoint input before the ”Waiting time
drive on” has elapsed.

”Waiting time drive off” prevents the axis from jerking caused by the re-
moval of the torque while the holding brake has not yet engaged.

S-0-0206 Waiting time drive on

(changeable in phase 3/4)

S-0-0207 Waiting time drive off

(changeable in phase 3/4)

0 ms

0 ms

Plug braking:

When the ”Drive on” 

and 

”Drive enable” signals have been set, the

torque will not become active unless P-0-0505 has elapsed. This is to
prevent that the motor power is connected although the braking resistors
are still active on the motor line because of hardware-related delays
when deactivating the braking resistors.

P-0-0505 KSB enable delay

(changeable in phase 2/3/4)

0 ms

L

Select EXTRAS 

"

 INITIALIZATION GUIDE.

The initialization guide will lead you step-by-step through the basic parame-

ter setting process.

Once the individual steps have been passed, you may send the basic pa-

rameter settings directly to the drive. 

If necessary, the data may be additionally saved in a *.scs file.

Alternatively

, you may use the monitor instead of the initialization guide in

order to adapt all values to your needs and transmit them to the drive.

LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01

Содержание Servodyn-D Series





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды