Bosch Servodyn-D Series Скачать руководство пользователя

Страница: 54 / 84

DSS user interface

4–13

1070 066 091-102 (01.08) GB

4.6.2

Save main memory

When switched on, or if the ”RESET” button has been depressed, the in-

verter first copies all data contained in the FEPROM to the RAM and uses the

RAM data for operation only. Changing parameters will initially affect the

RAM data only. In order to give a lasting effect to parameter changes, you

therefore have to execute the ”Save main memory” command before switch-

ing off or a RESET. By issuing this command, the drive will copy the data from

the RAM to the FEPROM.

The ”Save main memory” command is no alternative for a backup!

For example, parameters that have been set and optimized during ini-

tial commissioning can be used for another drive only (series commis-

sioning), if a backup was made (refer to section 5.3 on page 5–10).

CAUTION

”Save main memory” cannot be reversed!

All data contained in the FEPROM will be replaced with the current

data.

If you are not sure whether you still need the old FEPROM data,

please contact your systems administrator before executing this

command.

CAUTION

Current operating mode will also be saved!

Exit the active setpoint box, if any, or the setpoint generator before

triggering ”Save main memory”. Otherwise, the setpoint inputs by

the PROFIBUS will not take effect!

Switch the drive to phase 4.

Select the menu sequence

CONTROL

SAVE MAIN MEMORY

– or –

SAVE MAIN MEMORY in the ”Overview” window.

LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01

Содержание Servodyn-D Series





















































































Результаты поиска

Содержание Servodyn-D Series

Отзывы:

Похожие инструкции для Servodyn-D Series

Бренды по названию

Популярные бренды

Bosch Servodyn-D Series, Руководство пользователя

Результаты поиска

Содержание Servodyn-D Series

Отзывы:

Похожие инструкции для Servodyn-D Series

Бренды по названию

Популярные бренды