Bosch MIC IP PSU страница 89 Скачать руководство пользователя

Страница: 89 / 100

MIC Series IP Power Supply

Operation | en

Bosch Security Systems, Inc.

User Manual

F.01U.265.804 | 1.6 | 2012.08

Select the number of entries that are displayed simultaneously.

Click a list entry. The playback for the selected track starts immediately in the video

window.

Exporting recordings

You can export tracks or sequences to an FTP server. The FTP server is defined on the FTP

Posting settings page.

In the list, select the tracks you want to export.

If required, change the times within the selected range. To do so, drag the mouse over

the time bar or enter the values in the text fields next to the Export to FTP button.

Click Export to FTP to send the selected recordings to the FTP server. The information

below the button allows you to monitor the export.

Controlling a playback

You will see a time bar below the video image for quick orientation. A green arrow above the

bar indicates the position of the image currently being played back within the sequence.

The time bar offers various options for navigation.

Red bars indicate the points in time where alarms were triggered. Drag the green arrow to

navigate to these points quickly.

You can change the time interval by clicking the zoom keys (magnifying glass icons). The

display can span a range from two months to a few seconds.

Drag the green arrow to the point in time at which playback should begin. The date and

time display below the bar provides orientation to the second.

Buttons

You can control playback by means of the buttons below the video image. The buttons have

the following functions:

Slide controls

Use the slide control below the Start button to control playback speed. The default value of

100% represents real time speed. Higher values speed up the playback, lower values slow it

down.

Use the slide control below the time bar to control playback direction. Drag the rectangle to

the right for fast forwarding the playback. Drag it to the left for rewinding.

Start or pause playback

Leap to the start of the active video sequence or to the previous sequence

Leap to the start of the next video sequence

Содержание MIC IP PSU





































































































Результаты поиска

Содержание MIC IP PSU

Отзывы:

Похожие инструкции для MIC IP PSU

Бренды по названию

Популярные бренды

Bosch MIC IP PSU, Руководство пользователя

Результаты поиска

Содержание MIC IP PSU

Отзывы:

Похожие инструкции для MIC IP PSU

Бренды по названию

Популярные бренды