Bosch MIC IP PSU страница 40 Скачать руководство пользователя

Страница: 40 / 100

en | Configuration using a Web browser

MIC Series IP Power Supply

F.01U.265.804 | 1.6 | 2012.08

User Manual

Bosch Security Systems, Inc.

Display milliseconds

You can only select this option if the Time stamping function is activated. If necessary, you can

also display milliseconds. This information can be useful for recorded video images; however,

it does increase the processor's computing time. Select Off if you do not need to display

milliseconds.

Alarm mode stamping

Select On to display a text message overlay in the image in the event of an alarm. It can be

displayed at a position of your choice that you can then specify using the Custom option. Or it

can be set to Off for no overlay information.

Select the desired option from the list.

If you select the Custom option, additional fields are displayed where you can specify the

exact position (Position (XY)).

In the Position (XY) fields, enter the values for the desired position.

Alarm message

Enter the message to be displayed in the image in the event of an alarm. The maximum text

length is 31 characters.

Video watermarking

Choose On if you wish the transmitted video images to be "watermarked". After activation, all

images are marked with an icon. The icon indicates if the sequence (live or saved) has been

manipulated (see

Section Display stamping, page 85

4.13

Advanced Mode: Web Interface

4.14

Appearance

On this page you can adapt the appearance of the web interface and change the website

language to meet your requirements. If necessary, you can replace the manufacturer's logo

(top right) and the product name (top left) in the top part of the window with individual

graphics.

Website language

Select the language for the user interface here.

NOTICE!

You can use either GIF or JPEG images. The file paths must correspond to the access mode

(for example

C:\Images\Logo.gif

for access to local files, or

http://www.mycompany.com/images/logo.gif

for access via the Internet/Intranet).

When accessing via the Internet/Intranet, ensure that a connection is always available to

display the image. The image file is not stored in the encoder.

Содержание MIC IP PSU





































































































Результаты поиска

Содержание MIC IP PSU

Отзывы:

Похожие инструкции для MIC IP PSU

Бренды по названию

Популярные бренды

Bosch MIC IP PSU, Руководство пользователя

Результаты поиска

Содержание MIC IP PSU

Отзывы:

Похожие инструкции для MIC IP PSU

Бренды по названию

Популярные бренды