Bosch MIC IP PSU страница 58 Скачать руководство пользователя

Страница: 58 / 100

en | Configuration using a Web browser

MIC Series IP Power Supply

F.01U.265.804 | 1.6 | 2012.08

User Manual

Bosch Security Systems, Inc.

For long-term, authoritative images, it is essential that you use an appropriately sized iSCSI

system.

It is also possible to let the VRM Video Recording Manager control all recording when

accessing an iSCSI system. This is an external program for configuring recording tasks for

video servers. For further information please contact your local customer service at Bosch

Security Systems.

Device manager

If you have added the device to a VRM system, the VRM Video Recording Manager will manage

all recording. In this case the Managed by VRM box is checked and you will not be able to

configure any further settings here.

Recording media

Select the required recording media here so that you can then activate them and configure

the recording parameters.

iSCSI Media

If you want to use an iSCSI system as a recording medium, you must set up a connection to

the required iSCSI system and set the configuration parameters.

Enter the IP address of the required iSCSI target in the iSCSI IP address field.

If the iSCSI target is password protected, enter this into the Password field.

Click the Read button. The connection to the IP address will be established. In the

Storage overview field, you can see the corresponding logical drives.

Local Media

The supported local recording media are displayed in the Storage overview field.

Activating and configuring storage media

The storage overview displays the available storage media. You can select individual media or

iSCSI drives and transfer these to the Managed storage media list. You can activate the

storage media in this list and configure them for storage.

In the Recording media section, click the iSCSI Media and Local Media tabs to display the

applicable storage media in the overview.

In the Storage overview section, double-click the required storage medium, an iSCSI LUN

or one of the other available drives. The medium is then added to the Managed storage

media list. In the Status column, newly added media are indicated by the status Not

active.

Click the Set button to activate all media in the Managed storage media list. In the Status

column, these are indicated by the status Online.

Check the box in the Rec. 1 or Rec. 2 column to specify which recording should be

recorded on the storage media selected.

NOTICE!

The iSCSI storage system selected must be available on the network and completely set up.

Amongst other things, it must have an IP address and be divided into logical drives (LUN).

CAUTION!

Each storage medium can only be associated with one user. If a storage medium is already

being used by another user, you can decouple the user and connect the drive with the

encoder. Before decoupling, make absolutely sure that the previous user no longer needs the

storage medium.

Содержание MIC IP PSU





































































































Результаты поиска

Содержание MIC IP PSU

Отзывы:

Похожие инструкции для MIC IP PSU

Бренды по названию

Популярные бренды

Bosch MIC IP PSU, Руководство пользователя

Результаты поиска

Содержание MIC IP PSU

Отзывы:

Похожие инструкции для MIC IP PSU

Бренды по названию

Популярные бренды