Bosch MIC IP PSU, Руководство пользователя

Страница: 50 / 100

50 en | Configuration using a Web browser MIC Series IP Power Supply
F.01U.265.804 | 1.6 | 2012.08 User Manual Bosch Security Systems, Inc.
– Auto (default): The camera switches out of Night Mode after the ambient light level
reaches a pre-defined threshold.
Night Mode Threshold
Adjusts the level of light at which the camera automatically switches out of night mode (B/W)
operation. Select a value between 10 and 55 (in increments of 5), where 10 is earlier and 55 is
later.
Night Mode Color
On or Off
Settings Group 3 has the following settings:
Backlight Compensation
Optimizes the video level for the selected area of the image. Parts outside this area may be
underexposed or overexposed. Select On to optimize the video level for the central area of
the image. The default setting is Off.
Stabilization
Turns on video stabilization.
Wide Dynamic Range
Turns on the wide dynamic range feature. Wide Dynamic Range improves image reproduction
in extreme high-contrast environments. Select from Off, On, or Auto Mode.
Settings Group 4 has the following settings:
Wiper
Controls the wiper of the MIC cameras. Options are:
CONTINUOUS: Wiper wipes continuously until deactivated manually or by the five-minute
timeout built in to the system. INTERMITTENT: Wipes twice, then turns off after 15
seconds.ONE SHOT: Wipes five times, then turns off.WASH WIPE: Wiper washes and wipes.
OFF: Turns off the wiper.
Wiper/washer
Click Start to start the wiper/washer. Click Stop to stop the wiper/washer.
Illuminator
Controls IR illuminators. When ON, the camera gives a much better image at low light
levels.[Valid only for MIC-550IR units.] Options are: On, Off, Auto.
IR focus correction
Optimizes the focus for IR lighting. Options are: On, Off, Auto.
4.25 Lens
Lens options are sorted into Settings Groups 1 through 2.
Settings Group 1 has the following settings:
Auto Focus
Continuously adjusts the lens automatically to the correct focus for the sharpest picture.
– One Push (default): activates the Auto Focus feature after the camera stops moving.
Once focused, Auto Focus is inactive until the camera is moved again.