Bosch K2200 Series Скачать руководство пользователя страница 55

Страница: 55 / 62

K2200 Series |

User Guide | Appendix A: Transactions

| 55

Bosch Security Systems | 7/03 | 17376 v1.1 / 47491C

Appendix A: Transactions

This appendix shows all the transactions generated
by the door controllers. Each transaction described
shows:

Description

- this is the text produced on the printer

Priority-

all

high priority

transactions are sent to

the printer before any other transactions.

An example of the printed report is also given. Each
transaction is preceded by an audit number [in
brackets], the date and time.

A.1

List of Transactions

Table 25: Transactions

Transaction

Description

Priority

Access
Authorized

A key has been allowed through an access point. This transaction will always be generated
unless the access point is set as entry or exit, when those types of transactions will be
produced.

[1274] 02/12/93 15:41 DOOR NAME KEYHOLDER Access Authorized

Alarm
Cleared

A door has been secured after an Unauthorized Access or a reader/cable has been restored
after an anti-tamper alarm.

[1268] 02/12/93 15:34 DOOR NAME Alarm Cleared

Alarm Zone
Active

An alarm module input has activated.

[1235] 02/12/93 15:14 ZONE 2 Alarm Zone Active

Anti-Tamper
Alarm

A reader has been disconnected or its cable has been broken.

[1263] 02/12/93 15:33 DOOR NAME Anti-tamper Alarm

Auto Relay
Reset

A relay, either on the door controller (main) or an alarm module (relay number), has been
reset by a time profile.

[1224] 02/12/93 15:11 DOOR CTRLR 1 MAIN 1 Auto Relay Set

[1231] 02/12/93 15:11 DOOR CTRLR 1 3 Auto Relay Set

Auto Zone
Disable

An alarm module input has been disabled with a time profile.

[1289] 02/12/93 15:54 ZONE 2 Auto Zone Disable

Auto Zone
Enable

An alarm module input has been enabled with a time profile.

[1298] 02/12/93 15:55 ZONE 2 Auto Zone Enable

Automatic
Lock

A door has automatically locked on a time profile.

[1296] 02/12/93 15:55 DOOR NAME Automatic Lock

Automatic
Unlock

A door has automatically unlocked on a time profile.

[1286] 02/12/93 15:54 DOOR NAME Automatic Unlock

Door Closed

A door has been closed after being left open.

[1272] 02/12/93 15:34 DOOR NAME Door Closed

Door Left
Open

A door has been left open beyond the time allowed following a valid access or REX

[1270] 02/12/93 15:34 DOOR NAME Door Left Open

high

Door Closed

A door has been closed after being left open.

[1272] 02/12/93 15:34 DOOR NAME Door Closed

Editor Off
(Panel)

An operator has left the Editor, or it has timed out, at the faceplate.

[1219] 02/12/93 15:02 MASTER KEY Editor Off (Panel)

Содержание K2200 Series































































Результаты поиска

Содержание K2200 Series

Отзывы:

Бренды по названию

Популярные бренды

Bosch K2200 Series, Руководство пользователя

Результаты поиска

Содержание K2200 Series

Отзывы:

Бренды по названию

Популярные бренды