Bosch ICP-MAP5000-2, Руководство по установке

Страница: 5 / 90

MAP 5000 Introduction | en 5
Bosch Security Systems B.V. Installation manual 2019-09 | 25 | F.01U.168.332
1 Introduction
1.1 Short information
This manual describes the installation, wiring, initial set-up and maintenance of the MAP 5000
system.
It is applicable for all MAP 5000 kits and the following main panels including all accessory
MAP 5000 products:
–
MAP Main Panel (ICP-MAP5000-2)
– MAP Main Panel with IP Communicator (ICP-MAP5000-COM) including the MAP GSM
module (ITS-MAP0008).
– MAP Main Panel Small (ICP-MAP5000-S)
– MAP Main Panel Small with IP Communicator (ICP-MAP5000-SC) including the MAP GSM
module (ITS-MAP0008).
1.2 Listings and approvals
The system is designed to comply with the certifications and approvals listed here.
Region Agency Certification
Germany VdS Class C, VdS G 111040
Europe CE Conformité Européene
Europe EN EN 50131-1:2006 + A1:2009
EN 50131-3:2009
EN 50131-6:2008
EN 50136-2/SP4/DP3
EN 50131-10
Switzerland SES Association of Swiss Installers of Security Systems
Edition V3 / 01.01.2011-d
France AFNOR / CNPP
Cert. NF&A2P Grade 3
Certificate Number ICP-MAP5000-2: 1133400003
Certificate Number ICP-MAP5000-COM: 1230200016
According to NF324-H58
1.3 Battery handling
The battery terminals must be covered after installation in order to avoid short circuits.
Suitable terminal covers are included in the scope of delivery of the power supply.
Danger!
Electrictity
Do not short-circuit the battery in the host alarm system. A short-circuited battery can deliver
large currents that might result in serious burns or create a fire hazard.
Further information is available at http://www.boschsecurity.com/standards.
1.4 Installation considerations
– When installing this system, ensure that all local and national wiring codes are met.
– Only authorized service personnel is allowed to install this system.
– Use only the installation material recommended by BOSCH Security Systems to ensure
error-free operation.