Bosch ICP-MAP5000-2, Руководство по установке

Страница: 80 / 90

80 en | Appendices MAP 5000
2019-09 | 25 | F.01U.168.332 Installation manual Bosch Security Systems B.V.
May view duress alarm X X
May view alarm count X X
May view event memory X X
May view control panel history X X
May print control panel history X X
May view control panel version X X
Maintenance category permissions 1 2 3 4
May adjust control center volume/brightness X X
May change output state X X
May set date time X
May test bell X X
May test motion detectors X X
May walk test automatic points X
May walk test points X
Tab. 8.5: Permissions
See also
– Installer button, page 66
– Manufacturer authorization, page 59
8.2.11 Additional functions of the main panel
The panel has the following additional functions which do not have any influence on the
intended operation of the panel.
Point type technical, fire for alarm inputs
Inputs that are assigned the device Point can be programmed to the point type technical or
fire (refer to Point types and point evaluation, page 59).
Internal program
Points of the point type Intrusion can be assigned to an internal program.
When points are assigned to an internal program, and internal program is switched on, the
points are capable of alarm signaling in disarmed state.
If the detector is tripped, an internal alarm is generated.
This internal alarm results in only local alarm signaling without a remote alarm.
Outputs for individual applications
Outputs of the panel can be used to control individual applications. A prerequisite for this is
that no behavior item (no activation by the intended operation of the panel) is assigned to
such an output.
Manual output control
4
Select Control Center > Behavior >Outputs Available For Direct Command.
Automatic via schedule
1. Using the schedule wizard, enter the time when the output is to be switched on/off.
2. As action, select Output ON or Output OFF .