Bosch ICP-MAP5000-2, Руководство по установке

Страница: 10 / 90

10 en | Introduction MAP 5000
2019-09 | 25 | F.01U.168.332 Installation manual Bosch Security Systems B.V.
Figure 1.5: Up to 8 control centers
Key Description
1 Current limitation
2 4-wire connection, take into account cable length, refer to , page 10
3 3-wire connection to the next power supply segment
4 Short-time current limitation to 3.2 A per output A / B
Cable length
The maximum number of control centers that can be supplied by one power supply depends
greatly on the length and diameter of the cable used.
Wire diameter Wire cross-
section
Length A Length B Length C Length D
0.8 mm 0.503 mm 2 . 325 m - - - - - - - - -
0.8 mm 0.503 mm 2 . 100 m 135 m - - - - - -
0.8 mm 0.503 mm
2
. 50 m 225 m - - - - - -
0.8 mm 0.503 mm 2 . 50 m 50 m 50 m - - -
1.0 mm 0.785 mm 2 . 500 m - - - - - - - - -
1.0 mm 0.785 mm
2
. 175 m 175 m - - - - - -
1.0 mm 0.785 mm 2 . 100 m 325 m - - - - - -
1.0 mm 0.785 mm 2 . 100 m 75 m 75 m - - -
1.0 mm 0.785 mm
2
. 50 m 400 m - - - - - -
1.0 mm 0.785 mm 2 . 50 m 125 m 125 m - - -
1.0 mm 0.785 mm 2 . 50 m 50 m 50 m 50 m
Tab. 1.1: Cable lengths
The following applies for VdS
For remote operation of the IPP-MAP0005 power supply, a control center assigned to the
same area must be provided for indication of power supply trouble (trouble in mains supply /
battery).