Bosch FW 200, Инструкция по установке и эксплуатации

Страница: 39 / 112

6 720 643 256 (2010/05)
MAIN MENU settings
|
39 US/CA
6.2 Heating program
Main menu: Heating
6.2.1 Timer programs for heating
Heating programs control heating operation.
There are three modes for heating operation:
•
Comfort
•
Economy
•
Frost
For each of those operating modes, there is a
specified room temperature stored on the
FW 200 heating controls (
Æ
Section 6.2.2,
page 41).
There are a total of six program spaces (A to F)
available for heating programs. Each heating
program contains the switch points for one week
(weekly program). You can activate one of the
heating programs for each heating zone.
Menu: Heating > Program
Use this menu to produce, amend or activate a
heating program for each heating circuit.
The heating programs are only active if the mode
selector is set to
.
Fig. 20 Example of heating program
For menu structure and adjustment ranges
Æ
page 33.
Menu: Heating > Program > Activate
Use this menu to assign heating circuit 1 and
heating circuit 2 different heating programs.
•
Heating circuit 1 : Select and activate heating
program for heating circuit 1.
•
Heating circuit 2 : Select and activate heating
program for heating circuit 2.
For menu structure and adjustment ranges
Æ
page 33.
Menu: Heating > Program > Edit
Use this menu if you want to adjust a heating
program with personalized time/temperature
level profile to each heating circuit.
For menu structure and adjustment ranges
Æ
page 33.
Menu: Heating > Program > Edit > A:Program A
... F:Program F
Use this menu to adapt the heating program of
your choice.
Set the supply temperature control
on the boiler to the maximum
required supply temperature.
Having several stored heating
programs simplifies changing from
one heating program to another,
e.g. if your job involves periods
when you work different shifts
(night shift/day shift), or for
vacation periods.
°F
°C
t
6 720 643 250-15.1O