Bosch FW 200, Инструкция по установке и эксплуатации

Страница: 21 / 112

6 720 643 256 (2010/05)
Operation
|
21 US/CA
5 Operation
Introduction
With the FW 200 heating controls, you can
automatically control the room temperature and
hot water temperature with a heating and DHW
program created according to your own
individual requirements.
Fig. 19 Example of heating program
If the controls are set according to your individual
requirements then you hardly need use the
menus for “day-to-day use”. Nevertheless, it is
useful to be familiar with the basic use of the
menus.
Therefore, you should read the whole of
Sections 5.1 and 5.2 below and adjust a heating
or DHW program to your own requirements as
described in Section 5.2.2.
Making the effort may be worth your while! The
procedure for changing a switch point will
illustrate everything you need to know about
navigating through the menus and entering
settings. You can then program other settings in
the same way with the help of information
contained in sections 6 and 8.
The description of the menus reflects the
arrangement of the menu options on the heating
controls. The tables in sections 6.1, 7 and 8.1
show the whole menu structure. They also
provide details of the adjustment ranges and
default settings for all adjustable parameters.
More information on the menu options can be
found in Sections 6.2 to 6.5 for user functions,
and Sections 8.2 to 8.9 for installer settings.
The description of a menu options starts with its
menu path. That shows you how to reach the
menu option concerned through the system of
menus. The individual menu levels are separated
by the > symbol, e.g. vacation > start.
Some menu options are dependent on others. In
such cases, a page reference directs you to a
description of the menu option on which it
depends. Make use of such page references to
other menu options. They will help you to
understand associated functions.
°F
°C
t
6 720 643 250-15.1O
The controls provide the option of
setting the desired room
temperature for the operating mode
concerned. This temperature entry
is not the actual room temperature.
This is an orientation value that
influences the required supply
temperature for the heating zone.