Bosch DIVAR 2000, Руководство по эксплуатации

Страница: 43 / 94

Recording
Enter here the relevant record settings for each connected channel. In most cases you can
record 2 streams for each connected channel. If required, use <Default> to reset all record
fields to the factory default. Use <Copy> to copy identical settings from one channel to other
channel(s).
Select here the relevant tab for the type of recording: Regular/Motion/Alarm (default is
Regular). The settings for each recording type is the same:
–
Channel: Select a connected channel (default is 1)
– Resolution (cannot be changed for Motion and Alarm)
–
Stream 1
– Stream 2 (recording in this sub-stream must be previously configured in Storage >
Recording)
– Frame rate (per second)
– Bit rate type (only for analog cameras)
– Bit rate in Kb/second
– Record audio (only for analog cameras)
– Audio encode (only for analog cameras)
NOTICE! The default setting for Bit rate is display optimized. For better system performance and
storage, select a lower Bit rate.
Channel type
Channel type (only for hybrid recorders)
This recorder has 32 channels. For the first 16 channels you can choose between analog or IP.
The first 16 channels are analog by default.
To change from analog to IP: always start with channel 16, then channel 15, etcetera. You
cannot change a random channel. Always select the adjacent lower channel.
8.3.3
8.3.4
DIVAR 2000 / DIVAR 3000 / DIVAR
5000
Settings | en 43
Bosch Security Systems Operation Manual 2016.09 | v1.0 | AM18-Q0717