Bosch DDU 8, Руководство пользователя

Страница: 83 / 160

Notice
Measurement of ‘Revolution’ is similar.
Computed sources
Configuring computed sources
Computed sources receive data from a measurement channel rather than an in‐
put pin.
▪ Sensitivity/Offset calculation on input channel
▪ Characteristic curve calculation on input channel
▪ Computed vehicle speed
▪ PWM output control (covered in a special section)
▪ Lap trigger (covered in a special section)
Example: Sensitivity/offset calculation on input channel
1. Click ‘Measurement Sources’ in the Toolbox.
2. Drag the ‘Sensitivity/Offset’ computed source from the Toolbox and drop it
on ‘Computed Channels’ in the DDU 8 Project Tree.
A ‘Computed Sensitivity/Offset Wizard’ opens.
Choose unit group
and unit of output
Enter sensitivity and offset
of conversion formula
Choose input
channel
3. Click ‘Next’ when done.
4. The second part of the ‘Computed Sensitivity/Offset Wizard’ opens.
10.4
10.4.1
Analog and Frequency Inputs | 10
Bosch Motorsport DDU 8 Manual 83 / 160