Bosch DDU 8, Руководство пользователя

Страница: 82 / 160

1. Click ‘Measurement Sources’ in the Toolbox.
2. Expand the list of ‘I/O Channels’ by clicking on ‘+’ in the DDU 8 Project Tree.
3. Drag the ‘Velocity’ digital signal source from the Toolbox and drop it on the
desired ‘REV’ input channel in the DDU 8 Project Tree.
4. The ‘Velocity Wizard’ opens.
Choose data type of the
measurement variable
Circumference of wheel for
speed calculation
Special functionality for sensors
with frequency offset (e.g.
Correvit) Set to ‘0’ for wheelspeed
measurement
Number of teeth on the pulse
wheel
Enter name to automatically
create a new measurement
sheet
5. Click ‘Finish’ when done.
6. Enter channel name and description.
7. Click ‘OK’ when done.
The channel is inserted into the DDU 8 Project Tree.
Input pin
has hall
interface
Number of
teeth Wheel
circumference
Channel is
linked to
REV01
Available measurements for channel:
Measurement label Function
raw_name mV value of sensor
raw_name_fi filtered mV value of sensor
name physical value of sensor
name_fi filtered physical value
10 | Analog and Frequency Inputs
82 / 160 DDU 8 Manual Bosch Motorsport