Bosch DCN Next Generation, Руководство по эксплуатации

Страница: 184 / 290

Setup
Use the 8 Setup menu item to open the Setup sub-menu. You can use the menu items in this
sub-menu to configure the central control unit and the system.
Microphone
Use the menu items in the 8A Microphone sub-menu to set the microphone.
Menu item Parameter Value Description
8Aa Mic. Priority --- Temporarily off*
Permanently off The action taken by the system
when the chairman releases the
priority button.
8Ab Request LED LED setting Flashing*
Continuous Sets the behavior of the request
LED for the first delegate in the
request list.
8Ac Auto Mic. Off On
Off* Switches active microphones
automatically off after 30
seconds no speech. Chairman
units and interpreter desks are
excluded.
8Ad Request List Length 1-99 Sets the maximum number of
Requests in the queue.
8Ae Respons List Length 1-25 Sets the maximum number of
Responses in the queue.
Table 7.2: Microphone sub-menu (* = default)
Refer to the next table for the microphone priority settings
Value Description
Permanently off The system does not activate the microphones of the delegates again
when the chairman releases the priority button. The requests-to-speak
and speakers are erased.
Temporarily off The system activates the microphones of the delegates again when the
chairman releases the priority button. The requests-to-speak and
speakers are not erased.
Table 7.3: Microphone priority sub-menu values
Attention tones
Use the menu items in the 8B Att. Tones sub-menu to set the attention tones.
The central control unit can play an attention tone when the chairman:
–
Pushes the priority button on the chairman device.
– Starts a voting session.
Menu item Parameter Value Description
8B Att. Tones Event:
Priority*
Voting Tone:
Off, 1*, 2, 3
Off*, 1, 2, 3 The attention tones of the
system.
Table 7.4: Attention tones sub-menu (* = default)
184 en | Configuration Conference System
2013.11 | V2.0 | DCN-NG_OM_V4.x Operation Manual Bosch Security Systems B.V.