Bongshin BS-235, Инструкция по эксплуатации

Страница: 10 / 69

8
M
M
M
M
Key Switch
It is used when entering user setting mode from measurement mode.
It is used when exiting to measurement mode from user setting mode.
(ESC function)
It is used as a key to increase and decrease the numerical value of selected
number line of user setting mode.
It is used as calibration mode entry key
It is used as check mode entry key
It is used as location shift key when entering numerical value of user setting mode.
It is used as calibration mode entry key
It is used as check mode entry key
It is used when shifting to next menu from user setting mode.
It is used to save or exit after entering various setting values.
It is used as calibration mode entry key.
ZERO Setting
+
It is used for zero setting .
(No.2 key while pushing No.4 key or No,.4 key while pushing No.2 key)
Function Mode
+
It is used when entering function mode .
(No. 2 key while pushing No.1 key or No.1 key while pushing No. 2 key)
Calibration Mode
+
It is used when entering calibration mode .
(No.3 key while pushing No.,2 key or No,.2 key while pushing No.,3 key)
Relay Setting
+
It is used when entering relay setting mode .
(No.3 key while pushing No.1 key or No.1 key while pushing No.3 key)
Hold Mode
+
It is used when entering hold mode .
Hold is cancelled when pushing this key once again.
(No.1 key while pushing No.4 key or No.4 key while pushing No.1 key)
Key Lock or Unlock
+
It is used for key Lock or unlock .
Lock/ unlock is repeated ever time you push this key.
(No.3 key while pushing No.4 key or No.4 key while pushing No.3 key)
Check Mode
Power OFF
+
Power ON
It is used when entering check mode
.
Turn the power on when pushing two keys at once after turning off the power
(No.2 key and No.3 key at once)
※
It does not matter whether you push one key before another or two keys at once in case of mode to enter by
pushing two keys.