Bomar Ergonomic 320.250 DG, Руководство по эксплуатации

Страница: 41 / 115

41
Údržba stroj
e
Wartu
ng
Machine service
5. Put the brush into the function position and screw up the holder.
6. Install the rear protective cover of the frame.
7. Install the yellow protective cover of the band. The arrow on the cover must match
the direction of the arrow on the band. If it does not, you must turn the band
round.
4.3. Saw band stretching and inspection
Right saw band stretching is one of the most important criteria’s, which influents
accuracy and saw band service life. Stretch the saw bands according to the selected
saw band and the band saw. Keep the recommendation of your manufacturer.
4.3.1. Saw band stretching
1. The saw band must not fall from the wheels after setting.
2. Install the Tenzomat on the saw band and secure it with screws.
3. Stretch the saw band until it is stretched to the recommended value.
4.3.2. Saw band inspection
Check the saw band in the guiding cubes and on the wheels
1. Check, if the saw band is right in the guiding cubes..
2. Switch on the saw band drive and then after 10 seconds switch off saw band drive.
If the saw band drive is not possible to switch on, set the limit switch of the saw
band stretching.
3. Switch off the main switch.