Bomar Ergonomic 320.250 DG, Руководство по эксплуатации

Страница: 10 / 115

10
Manual version: 1.02 / Mar. 2010
Manual rev.: 1
Bezpeč
nos
tní po
ky
n
y
Sicher
heit
s
h
in
weis
e
Safety
n
o
tes
1.3. Safety notes for machine operator
Machine can be operated only by one person. Machine operator is responsible for
presence of other persons by the machine.
Close covers before the machine starting and check, if the covers are not damaged.
Damaged covers must be repaired or changed. Do not start the machine, if the cover is
removed! Check, if the electric cables are not damaged.
•
Do not hold the material for clamping to the vice and for cutting!
•
Do not operate with the buttons and the switches on the control panel, when you
have gloves!
•
For machine starting take care, that there is nobody in the working area of the
machine (it means in the working area of the vice, the saw band, the saw arm etc.).
•
In no circumstances touch the rotating elements.
•
Work on the machine only when the machine is in good condition!
•
Check at least once in a shift, if the machine is not damaged. If the machine is
damaged, you must bring the machine in order and you must inform your
superior!
•
Keep your working area clean! Ensure sufficient lighting in the working area.
•
Take off the spilt water or the oil from the floor and dry it. Do not touch the
cooling liquid with bare hands! Do not set the nozzle of the cooling liquid, when
the machine is started on
•
Do not remove the chips from the working area of the machine, when the
machine is started on!
•
Do not use the compressed air for the machine cleaning or for the chips
removing!
•
Use the protective instruments for chips removal!
1.4. Safety notes for the servicing and repairs
Switch off the main switch and lock it, before you start service work! Otherwise, there is
possibility of hazardous machine starting.
Only qualified person can do the servicing and repairs. For parts changing, use only
parts, which are identical with the originals. Otherwise, there is possibility of health
hazard. Use only recommended type of the hydraulic oils and oils and lubricants!
Attention!
Machine can be operated by person older than 18 years!
Machine can be operated only person physically and mentally fit
for this activity
Keep instructions and orders about work safety!
Read the operating instructions, before you start to work on the
machine! Keep the operating instructions in good condition!
Attention!
Do not connect the machine to electricity if the covers are
removed. Do not touch the electrical equipment.
Attention!
Only a qualified professional can carry out the servicing and
repairs of the electric equipment! Take special care during the
work with electrical equipment. High voltage shock can have
fatal consequences! Always keep notes about work safety!
Otherwise, there is possibility of heavy injury!