Bomar Ergonomic 320.250 DG, Руководство по эксплуатации

Страница: 22 / 115

22 Manual version: 1.02 / Mar. 2010
Manual rev.: 1
Do
ku
me
nt
ace s
troje
Do
ku
me
nt
at
ion der
Mas
c
hi
nen
Machine docume
ntation
Sf
2.5. Activation
2.5.1. Machine working conditions
Keep the conditions of the manufacturer for machine operating! If recommendations
are not kept, damage can occur to the machine.
The manufacturer warrants the correct function of the machine for these
conditions:
•
At temperature air from 5°C to 40°C , the temperature average during 24 hours
must not exceed over 35°C .
•
At relative dampness of the air in the extend from 30% to 95% (not concentrate)
•
Altitude lower than 1000 metres.
•
Do not expose the machine to the radiation (for example microwave radiation,
ultra-violet radiation, laser radiation, x-ray radiation). Radiation can cause problems
with the machine function and deteriorating condition of the isolation.
2.6. Band saw unpacking and assembling
Remove the packing from the machine and unpack all parts.
Component Description
Assembly of the control panel
Screw on the control panel with 4 screws to the
pedestal.
Assembly of the hold-down lever..
Attention!
Switch off the main switch and lock it, before you start
assembly! Otherwise, there is possibility of hazardous machine
starting.