Bomar Ergonomic 320.250 DG, Руководство по эксплуатации

Страница: 34 / 115

34 Manual version: 1.02 / Mar. 2010
Manual rev.: 1
Ovládá
ní str
o
je
Bedi
en
ung
der
Masch
ine
Machine control
3.3.3. Cutting speed adjustment
Picture Description
Ergonomic 320.250 DGS without freq. converter
•
speed 40 m.min
-1
– turn speed switch into pos. no. 1
•
speed 80 m.min
-1
– turn speed switch into pos. no. 2
Ergonomic 320.250 DGS with freq. Converter
•
Change bansaw speed by frequency converter in range
20–120 m.min
-1
.
3.3.4. Angular cut setting
The cut angle can be varied from -45° to 60° . The angles -45° , 0° , +45° and 60° is set by
means of the fixed stop.
Picture Description
povolit
lösen
loosen
utáhnout
festziehen
tighten
1. Loosen the saw arm and release-securing
lever of the console.
2. Set the desired angle of the cut. If you want
set the cut angle bigger then 45°, pull out the
stop pin.
3. Turn the saw frame to the desired angle
according to the scale on the turning console
and tighten the securing lever of the console.