manualshive.com logo in svg

Bomar Ergonomic 320.250 DG, Руководство по эксплуатации

Поделиться
Скачать
Bomar Ergonomic 320.250 DG Скачать руководство пользователя страница 40

 

 

40 

Manual version: 

1.02 / Mar. 2010

Manual rev.: 

1 

Údržba stroj

e

 

Wart

un

g / 

 

Machine service

 

5.

 

Turn by stretching star to the left side, release saw band stretching and pull saw 
band from blade wheels. 

 

6.

 

Pull up the saw band from the guiding cubes. 

4.2.

 

Saw band installation 

1.

 

Prior to installation, clean all track wheels, guide cubes and inner side of the arm 
thoroughly of all traces of chips and dirt. 

Keep in mind the teeth direction when 

installing the saw band

. 

 

2.

 

Insert new saw band in the guide cubes. Make sure the saw band runs between 
both guide rollers and it is pushed all the way to the top. 

 

3.

 

Put the saw band on both guide wheels. Make sure that the saw band ridge fit 
tightly to the wheel rim. Then push the saw band as far back as possible. 

4.

 

By turning the stretching star to the right, you will stretch the saw band slightly. 

 

Содержание Ergonomic 320.250 DG




















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды