Bolin Technology VCC-7 Series, Руководство пользователя

Страница: 50 / 57

50
Storing the Camera Settings in Memory
— the Presetting Feature
Memory (Preset)
Using the preset function, 9 sets of camera shooting conditions can be stored and recalled. 9 sets of camera shooting
conditions can be stored and recalled by using remote controller. Up to 128 presets via protocol programming.
This function allows you to achieve the desired status instantly, even
without adjusting the following items each time.
•
Pan/Tilt Position
•
Zoom Position
•
Focus Auto/Manual
•
Focus Position
•
AE Mode
•
Shutter control parameters
•
Bright Control
•
Iris control parameters
•
Gain control parameters
•
Exposure Compensation On/Off
•
Exposure Level
•
Backlight Compensation On/Off
•
White Balance Mode
•
R/B Gain
•
Aperture Control
•
WD Parameter
The settings stored using this function are recalled when the power is
turned on.
1.
Press the PAN-TILT RESET button to reset the pan/ tilt position
.
2. Adjust the position, zooming, focusing and backlighting of the camera.
While holding down the PRESET button, press any of the POSITION buttons, 1
to 9, in which you want to store the settings.
Recalling the stored settings
Press any of the POSITION buttons, [1] to [9], in which you have stored
the settings.
Cancelling the preset memory
While holding down the RESET button, press the POSITION button from
which you want to cancel the settings.
Notes
•
When the power is turned on, the camera starts with the settings
stored in POSITION 1.
•
If you want to retain the previous pan and tilt positions, etc. before
the power is turned off and turned on again, store those positions
in POSITION 1.
•
When you are storing or cancelling the settings in one POSITION, you cannot call up, store or cancel
the settings in another POSITION.
•
When the menu is displayed on the screen, you cannot perform the operation for storing, recalling, or
cancelling the setting. Be sure to return to the normal display before starting these operations.