background image

11 

 

Remote Controller 

1.  MENU, on screen menu display ON/OFF 
2.  Camera IR ID Selector for Remote Control. 
3.  AI Features, available when AI button (13#) is pressed. (Not activated, for future use). 
4.  Positioning Function and Number Buttons 

 

Preset Position Calling and Setting

 

 

5.  Value adj for Feature Item NO.11. 
6.  Preset button, to set preset position. 
7.  Zoom. Telescope and Wide with slow speed. 
8.  Auto Framing. (Not activated). 
9.  Direction Control 

 

PAN-TILT direction control 

 

OSD menu navigator 

 

HOME: Home position, confirm button, Enter 
button.  

10. FOCUS 

 

Manual Focus, Far, Near 

 

Auto Focus 

11. Features Direct Control, work with Value Adjust key + 

and 

– to make the feature adjustments. 

 

Gain, Image gain adjustments 

 

Color, Image color saturation adjustments 

 

Black L, Image Black Level adjustments 

 

WB.R, Image White Balance Red adjustments 

 

PT S, Pan/Tilt Speed adjustments 

 

Zoom S, Zoom Speed adjustments 

 

Preset S, Preset Speed adjustments 

 

WB.B, Image White Balance Blue adjustments 

 

WDR, Wide Dynamic Range adjustments 

 

Freeze, To get a frozen image. 

 

B Light, Back Light compensation 

 

OPW, One Push White Balance 

12. Video Format Switching, Works with pressing and 

holding Fn button. 

 

You can change the video format by keep 
pressing the button. (When video format is 
changed, the camera would restart and the 
screen turns black for few seconds.) 

13. AI Mode key (Not activated, for future use) 

 

Press AI button once, then press one of the AI 
features (Printed in color blue). 

14. Power (Press and hold for 3 second) 

 

Power ON the camera to turn the camera in 
operation status.  

 

Power OFF the camera to turn the camera in 
standby status. 

 

When the camera is powered OFF, the 
camera turns to the back and would be on 
standby mode. 

 

When the camera is powered ON, the camera turns to the front. 

 

Powering the camera ON/OFF would not restart the camera. 

15. Fn Function Mode key 

 

Press and hold the Fn key, and press one of the function buttons that printed in color brown. 

16. Reset button, to cancel preset that has been set. 
17. Zoom. Telescope and Wide with fast speed. 
18. One Push AF 

 

Press once to focus. 

Notes 

 

 

AAA Battery is not included with the remote controller. 

Содержание VCC-7 Series


























































Отзывы: