Bolin Technology VCC-7 Series, Руководство пользователя

Страница: 10 / 57

10
1. Front Tally Light
2. IR Remote Controller Sensors
These are sensors to receive commands from infrared remote controller.
3. Lens
This is a 20X magnification optical zoom lens of 4K image
4. Power LED Indicator
Turns green when the camera is connected to power outlet. When the power is turned on, it takes about 15 to 30
seconds to display the image after LED turns on.
5. Back Panel
6. 12V DC Power Port
Connect the supplied DC power adaptor and cord.
7. RS232 Control Port (RJ45)
RJ45 to RS232 convertor cable is provided.
8. RS-422 Control Port (RJ45)
RJ45 to RS422 convertor cable is provided
9. RJ45 Port for IP Network Video Streaming or HDBaseT Video Output
•
For VISCA over IP control and IP video streaming with POE (IEEE802.3bt) power input when it is used
as IP Network Port;
•
For HDBaseT output, provides video, control, audio and IP video streaming/control including power to
camera transmit up to 80-100 meters over one CAT6 network cable when it is used as HDBaseT Port.
10. HDMI Port (HDMI 1.4)
11. 3G-SDI Video Output
12. USB2.0 Port
For firmware upgrade only
13. Video Format Selector
For video format selection
14. IR Remote ID Selector
Camera ID for IR remote controller
15. Micro SD Card Port
16. Audio Output/Input(Line-in/out)
17. CVBS Video Output
18. Bottom piece screws ( Open them without authorization will violate warranty regulation )
19. Fix Mounting Holes
For original wall/ceiling mount bracket
20. Tripod mounting holes
21. Bottom DIP Switch