Step 6: Alarm schedule setup:
When there is view tampering alarm happened,
DVR will handle the alarm based on the schedule. You can set 4 periods for each day one
week. Also you can copy the schedule of one day to other days.
Notes: Time periods can not overlap. Please reboot DVR to make the parameters into
effective.
Step 7: Setup alarm policy:
If there is view tampering alarm happened during
schedule, DVR will response based on the policy. You can select one or more solution
including “On Screen Warning”, “Audible Warning”, “Upload to Center” and “Trigger Alarm
Output”. You can use
[
È
] [
Ç
]
and
[
EDIT
]
key to enable or disable them. “×” is disable and
“
9
” is enable.
Step 8: Save alarm setup:
After your setup, press “Confirm” button and return
“Image Setup” interface. In “Image Setup” menu, press “Confirm” button to save current
camera parameters and return main menu.
Step 9: Save all cameras:
If you want to setup other cameras, please repeat from
step2 to step 8. In “Image Setup” menu, press “Confirm” key to save all cameras
parameters. Press “Cancel” button or
[
ESC
]
key to abort.
71
Содержание SVR-80xx-S series
