bolid S2000-BKI Скачать руководство пользователя страница 21

Страница: 21 / 21

The content of precious materials: does not require accountability for storage, retirement and

disposal (Clause 1.2 of GOST 2.608-78).

The content of non-ferrous metals: does not require accountability for retirement and further

disposal.

Manufacturer Warranty

The manufacturer guaranties the module meets with technical requirements stated in the

manuals if the user follows the instructions for transportation, storage, installation, and usage.

The warranty period is 18 months since putting the product into operation but no more than

24 months from the manufacturer’s date of production.

While sending the product for repair, please be sure to include a report describing the potential

failure.

Certificates Information

S2000-BKI Control Button and Indicator Module meets the requirements of Technical

Regulations of Eurasian Economic Union ‘On Requirements for Fire Safety and Fire Extinguishing
Equipment’ (TR EAEU 043/2017) and is covered by the conformity certificate No.

ЕАЭС

RU C-

RU.

ПБ

68.

.00382/21.

S2000-BKI Control Button and Indicator Module meets the requirements of Technical

Regulations of Custom Union ‘Electromagnetic Compatibility of Technical Equipment’
(TR CU 020/2011) and is covered by

ЕАЭС

№

-RU.HP15.B.06633/20 Conformity

Declaration.

S2000-BKI Control Button and Indicator Module is covered by the certificates of conformity of

transport safety technical arrangements with their functional properties No.

МВД

РФ

.03.000971.

Production of S2000-BKI Control Button and Indicator Module is awarded with the conformity

certificate GOST R ISO 9001. The certificate can be found at the website

http://bolid.ru

in the section

ABOUT COMPANY.

Содержание S2000-BKI






















Результаты поиска

Содержание S2000-BKI

Отзывы:

Похожие инструкции для S2000-BKI

Бренды по названию

Популярные бренды

bolid S2000-BKI, Руководство пользователя

Результаты поиска

Содержание S2000-BKI

Отзывы:

Похожие инструкции для S2000-BKI

Бренды по названию

Популярные бренды