bolid S2000-BKI, Руководство пользователя

Страница: 18 / 21

19
Parameter Description Range Default Value
11. Show “Duress” On / Off Off
12. Silence with iButton
Silencing the module by means of
touching with iButton
On / Off Off
13. Two Power Inputs
Monitoring
On / Off Off
2.2.6 Updating Firmware
The module provides updating its firmware. A new firmware version can expand functions of the
module or fix errors of the current version. The list of available firmware versions, their key aspects,
and recommended updates can be found online at
http://bolid.ru on the page of S2000-BKI, on the
Download tab.
Firmware is to be updated by means of UProg.exe, link to the actual version of which being
available at the same page. The procedure of updating firmware is described in the user’s manual; it can
be found in the program help.
Updating firmware can result to changes in the module’s configuration, so prior to updating
please save the module’s configuration file using UProg.exe. After updating is completed the
configuration from the file should be written to the module.
The procedure of updating takes several minutes.
The module can enter the updating mode as a result of an unexpected failure. In this case
updating (restoring) firmware under UProg.exe helps return the module to normal operation without
contacting a service center.
2.2.7 Testing Operability
Testing operability is conducted as described in Clause 3.4 of this manual.
2.2.8 Extreme Situation Actions
3 Maintenance
3.1 General
The device is to be maintained under the following schedule:
Table 3.1.1
Task Description Frequency
Visual checking Monthly
Check for operability At least six-monthly
3.2 Safety Precautions
The module shall be maintained by persons certified with the second or higher electrical safety
qualification level.
3.3 Maintenance Procedures
3.3.1 Inspecting the module includes checks for no mechanical damages, fastening reliability, and
proper condition of connecting wires and contact joints.
3.3.2
The module should be tested by operating engineering personnel with second or higher
electric safety qualification level.
3.3.3
Inspect the module at normal climatic conditions:
Warning!
If sparks, fire, smoke, and / or smell of burning are found at the installation site of the
device, the device must be de-energized and sent for repair