12
Table 1.4.17.
Availability of Indicator Types
Indicator Type
Available Under
Intrusion
Intrusion 2
Fire
Fault
S2000M of ver.1.20 and higher
S2000M of ver.2.03 and higher
Orion KD Suite of ver.7.4 and higher
Orion Pro Suite of ver.1.10 SP1 and higher
Engineering
Auxiliary
Auxiliary 2
Auxiliary 3
Intrusion 3
S2000M of ver.2.03 and higher
Orion Pro Suite of ver.1.11 and higher
Actuator
S2000M of ver.2.07 and higher
Orion Pro Suite of ver.1.12 SP2 and higher
Leakage Monitoring
Door Monitoring
Access Control
S2000M of ver.3.00 and higher
Table 1.4.18.
Availability of Operations
Operation
Effective Under
Arm / Disarm
S2000M of ver.1.20 and higher
S2000M of ver.2.03 and higher
Orion KD Suite of ver.7.4 and higher
Orion Pro Suite of ver.1.10 and higher
Turn Actuator On / Off
Reset Alarms
S2000M of ver.2.07 and higher
Orion Pro Suite of ver.1.12 SP2 and higher
1.4.6
Pressing on one of “1” to “60” buttons sends the network controller a request to execute one of
the commands Arm, Disarm, Turn Actuator On / Off, Reset Alarms. The network controller considers
the received request and makes a decision about access to the requested action, the relevant indicator
blinking until the command is either executed or rejected:
Request to arm,
Request to disarm,
Request to switch the actuator on / off,
Request to reset alarms
Blinks with green and amber alternately
four times per second
1.4.7
Table 1.4.19
displays operation patterns of the buzzer depending on the conditions of related
partitions.
Table 1.4.19.
Buzzer Performance
Conditions
Sounding Pattern
Activated
Changes tone once per two seconds
Start Delay, Start Delay Hold
more than 15 seconds left
Changes tone once per second
Start Delay, Start Delay Hold
less than 15 seconds left
Changes tone twice per second
Start Delay, Start Delay Hold
less than 5 seconds left
Changes tone four times per second
Fire 2 Alarm
0.8 s On / 0.2 s Off
Fire Alarm
0.6 s On / 0.4 s Off
Fire Prealarm
0.25 s twice / 1.25 s Off
