Bobike Classic Junior Plus, Руководство пользователя

Страница: 20 / 60

20
Bobike Classic Junior Plus
rear junior seat for bicycle - frame mounting system
EN
• This child bicycle seat must not be mounted to bicycles fitted with rear
shock absorbers.
• This child bicycle seat must not be mounted to motorized vehicles such
as mopeds, scooters and speed pedalecs.
• This junior bicycle seat is only suitable for carrying children with a
maximum weight of 35 Kg, minimum height of 1,10mts and above 6 years
of age, that are able to secure and keep their balance autonomously on the
seat during the ride.
• The total weight of the cyclist and the child transported must not exceed
the maximum permitted load permitted for the bicycle. Information on
the maximum load can be found in the operating instructions of the
bicycle. You can also contact the manufacturer for this question.
• The seat may only be mounted on a bicycle suitable for the attachment
of such additional loads.
• The position of the child bicycle seat must be adjusted so that the bicycle
rider does not touch the child bicycle seat with the feet when in motion.
• It’s very important to adjust correctly the seat and its component parts for optimum comfort and safety of the child. It is also important that the seat
does not slope forward, so that the child does not tend to slide out of it. It
is also important that the backrest slope backward slightly.
• Check if all parts of the bicycle function correctly with the child bicycle
seat mounted.
•
Check the instructions of the bicycle, and If you have any doubts
on fitting the child bicycle seat to your bicycle, please contact your
bicycle supplier for further information
.
FOR FRAME: SPECIFIC FEATURES
• This child bicycle seat must not be mounted in bicycles with triangular,
square or carbon fiber frames.
• This child bicycle seat must be assembled on bicycles with round frames
with diameters ranging from Ø28 to Ø40 mm.
• The child bicycle seat must be assembled on bicycles with wheels with
diameters of 26”, 27,5” and 28”.
Specific Instructions for Mounting
• The rider must be at least 16 years of age;
• Check for any laws and regulations that might be in force in your country.
Relating to the carrying of children in seats attached to cycles.
• Carry only children that can sit unaided for a longer period, at least as long
as the intended cycle journey.
• Do not carry a child less than 6 years of age in this child bicycle seat. To
be a passenger, the child must be able to sit up straight with the head held
upright while wearing a bicycle helmet. A doctor should be consulted if
the child’s growth is questionable.
• Make sure that the weight and height of the child do not exceed the
maximum capacity of the seat, and check this at regular intervals. Check
the weight of the child before using the child seat. Under no circumstances
should you use the child bicycle seat to transport a child whose weight is
above the permissible limit.
• Make sure to check from time to time that the weight and height of the
child do not exceed the maximum permissible load of the seat.
• Make sure that it is not possible for any part of the child’s body or clothing
to come into contact with moving parts of the seat or bicycle and check
this as the child grows.
• Do not allow any part of the child’s body or clothing, shoelaces, child
bicycle seat belts, etc. to come in contact with moving parts of the bicycle
because can be harmful to the child or cause accidents.
• You must cover any sharp or pointy objects on the bicycle that may be
reached by the child, in any situation (e.g frayed cables).
• A wheel protector is recommended to prevent the child from
inserting its feet or hands between the spokes. The use of protection
underneath the saddle or the use of a saddle with internal springs is
mandatory. Make certain that the child is not able to hinder the brakes, thus avoiding accidents. These adjustments should be revised with
child´s growth.
• When the child bicycle seat is not in use, fasten the waist buckle of the
security harness to prevent the straps from dangling and entering in
contact with some turning part of the bicycle as wheels, brakes, etc. as
these may be a hazard to the cyclist.
• Secure the child into child bicycle seat ensuring that all the safety belts
and straps applied firmly but not so tight as to cause discomfort to the
child. Please check the safety of the fasteners often.
• The child bicycle seat must never be used before adjusting the safety belt.
• Always use all safety restraint system and straps to ensure that the child
is secured in the seat.
• Dress the child in proper clothes according to weather conditions and use
an appropriate helmet.
• Children in child seats need to be more warmly dressed than riders of
cycles and should be protected from rain.
• Remove the seat when transporting the bicycle by car (outside the car).
Air turbulence might damage the seat or loosen its fastenings or other
suspended elements, which could lead to an accident.
• Accompanying persons should carefully consider stability / balance
when placing the child on the bike in the seat.
• Make sure that children should wear a suitable helmet that complies with
EN 1078 while riding in the seat.
• The seat and cushion can get hot if under the sun for a long time. Make
sure that they are not too hot before seating the child.
• This child seat is not suitable for use during sporting activities, or in
extreme conditions as per example: enduro, hard mountain biking, big
road holes, jumps and off-road ways.
• Additional security devices shall always be fastened.
Specific Instructions for Use