BNF Blade 500 3D, Инструкция по эксплуатации

Страница: 5 / 64

5
EN
CAUTION:
Mishandling of Li-Po batteries can result in a fire, personal injury, and/or property damage.
• By handling, charging or using the included Li-Po battery, you assume all risks associated with lithium batteries.
• If at any time the battery begins to balloon or swell, discontinue use immediately. If charging or discharging, discontinue and disconnect. Continuing to use,
charge or discharge a battery that is ballooning or swelling can result in fire.
• Always transport or temporarily store the battery in a temperature range of 40–120º F (4–49º C). Do not store battery or model in a car or direct sunlight. If
stored in a hot car, the battery can be damaged or even catch fire.
• Always charge batteries away from flammable materials.
• Always inspect the battery before charging and never charge damaged batteries.
• Only use a charger specifically designed to charge Li-Po batteries. Failure to charge the battery with a compatible charger may cause fire resulting in per-
sonal injury and/or property damage
• Always constantly monitor the temperature of the battery pack while charging.
• Always disconnect the battery after charging, and let the charger cool between charges.
• Never discharge Li-Po cells to below 3V under load.
• Never cover warning labels with hook and loop strips.
• Never leave charging batteries unattended.
• Never charge batteries outside recommended levels.
• Only charge batteries that are cool to the touch.
• Never attempt to dismantle or alter the charger.
• Never allow minors to charge battery packs.
• Never charge or store batteries in extremely hot or cold places (recommended between 40–120° F or 4–49° C) or place in direct sunlight.
Charging Warnings
RTF
Throttle Hold
Throttle hold only turns off the motor on an electric helicopter. You maintain
pitch and direction control.
The blades will spin if throttle hold is OFF (0). For safety, turn throttle hold ON
(1) any time you need to touch the helicopter or check the direction controls.
Throttle hold is also used to turn off the motor if the helicopter is out of control,
in danger of crashing, or both. Throttle hold will also allow you to perform an
auto-rotation landing when the helicopter has sufficient altitude.
Please refer to your DX6i transmitter manual for more information on throttle
hold.
CAUTION: For safety, always ensure you have turned TH HOLD ON (1)
until you are ready to fly the helicopter.