BMW Z4 Roadster, Руководство пользователя

Страница: 209 / 344

Switching on/off
Switching on automatically
The system is automatically switched on if selec‐
tor lever position R is engaged while the engine
is running.
Switching off automatically when
moving forwards
The system switches off when a certain distance
or speed is exceeded.
Switch the system back on if necessary.
Depending on the equipment:
switching on/off manually
Press the Park Assistant button.
▷ On: the LED is illuminated.
▷ Off: the LED is extinguished.
The parking assistance functions are shown on
the Control Display.
Switching the view via iDrive
If the rear-view camera view is not displayed,
change the view via iDrive:
1. If necessary, tilt the Controller to the side.
2. "Rear view camera"
The image from the rear-view camera is shown.
Operating requirements
▷ The rear-view camera is switched on.
▷ The boot lid is completely closed.
▷ Keep the detection area of the camera clear.
Projecting loads or carrier systems that are
not connected to a trailer socket can restrict
the detection area of the camera.
Assistance functions
General
A number of assistance functions can be active
simultaneously.
The assistance functions can be activated man‐
ually.
1. If necessary, tilt the Controller to the right.
2. With the corresponding equipment:
"Camera picture"
3. ▷ "Parking guide lines".
Driving path lines and turning circle lines
are shown, see page
209 .
▷ "Obstacle mark.".
Depending on the equipment, the obsta‐
cles detected by Park Distance Control
PDC are displayed, see page
210 , by
markings.
Parking aid lines
Driving path lines
The driving path lines help you to estimate the
space required when parking and manoeuvring
on a level road surface.
The driving path lines are dependent on the
steering angle and are continuously adapted to
the steering wheel movements.
Seite 209
Driver Assistance Systems
CONTROLS
209
Online Edition for Part no. xxx - X/18