▷
Each time the rocker switch is pressed to the
resistance point, the desired speed is in‐
creased or decreased by 1 km/h, 1 mph.
▷
Each time the rocker switch is pressed be‐
yond the resistance point, the desired speed
changes to the next multiple of 10 km/h on
the km/h display or the next multiple of 5 mph
on the mph display in the speedometer.
The maximum speed which can be set de‐
pends on the vehicle.
▷
Pressing the rocker switch to the resistance
point and holding it there accelerates or de‐
celerates the vehicle without pressing the ac‐
celerator pedal.
The speed is maintained after releasing the
rocker switch. Pressing beyond the resist‐
ance point accelerates the vehicle more rap‐
idly.
Resuming Cruise Control
If Cruise Control is interrupted, it can be resumed
by calling up the saved speed.
Before calling up the saved speed, make sure
that the difference between the current speed
and the saved speed is not excessively large.
Otherwise, there may be inadvertent braking or
acceleration.
While the system is interrupted, press
the button.
Cruise Control is resumed with the saved values.
The saved speed value is deleted and can no
longer be called up in the following instances:
▷
When the system is switched off.
▷
When drive-ready state is switched off.
Displays in the instrument
cluster
Display in the speedometer
▷
Green indicator: system is ac‐
tive, the indicator shows the
desired speed.
▷
Grey mark: system is interrup‐
ted; the mark shows the
stored speed.
▷
No marker: system is switched off.
Indicator lamp
▷
Green indicator lamp: the system is
active.
▷
Grey indicator lamp: the system is in‐
terrupted.
▷
No indicator lamp: the system is switched off.
Status display
With the corresponding equipment, the set
speed limit is displayed digitally for a short time.
Displays in the Head-Up Display
Some information from the system can also be
shown in the Head-Up Display.
The symbol is displayed when the de‐
sired speed set has been reached.
System limits
The desired speed is also maintained on a down‐
hill stretch. The vehicle may drive slower than the
desired speed on uphill gradients if the engine
power is not sufficient.
In ECO PRO drive mode, it is possible that the
vehicle will drive faster or slower than the desired
speed setting in some situations, for example on
downward or upward gradients.
Seite 194
CONTROLS
Driver Assistance Systems
194
Online Edition for Part no. xxx - X/18
Содержание Z4 Roadster
