BMR SFU 0303, Руководство пользователя

Страница: 14 / 62

14
SFU 0303 Frequenzumrichter
2) With SFU-Terminal the "active" function of the relays can be changed to "not energized " also. By
this an inversion is achieved, with the restriction that this is applied to the inverter during operation at
POWER-ON, only, because it is just realized by software. At POWER-OFF, the relay contacts have the
default setting as in 1 )
✓
The digital outputs (Relay1...5) are galvanically separated (500V
Isolation
).
DC: 24V / 1000mA AC: 125V / 500mA
✓
Output level Speed / Hall Sensor: 0-24V (24V Level)
6.3 Spindle Interface - Version SSE: X4
(9 pin Pluggable screw terminal)
The Default-settings of the functions for the inputs can be set up freely with the help of the PC-
Software SFU-Terminal. The inputs of the encoder and the PTC are fix wired.
Pin Description Direction Function
1 +12V/50mA Output Auxiliary voltage supply
2 Spindle GND Reference Ground for Speed- and Temp-sensor
3 NC not connected
4 FP/Speed sensor Input
Input for 2/3-wire speed sensors /
Hall sensors from spindle
5
Temperature
Sensor
Input Temperature signal from spindle: PTC, KTY, PT1000
6 Bit 4 Input Characteristic selection by digital inputs
7 Bit 3 Input Characteristic selection by digital inputs
8 Bit 2 Input Characteristic selection by digital inputs
9 Bit 1 Input Characteristic selection by digital inputs