BlueBox IDTRONIC UHF Advant 5238U-PN-C, Руководство пользователя

Страница: 11 / 71

BLUEBOX Advant Profinet Page 11 of 71
Parameter Description Range Default
Reading
Antenna
Information
Reading antenna information.
Disabled,
enabled
Disabled
Transponder
Type
Information
Transponder type information.
Disabled,
enabled
Disabled
Trigger
‘Continuous’
Mode with
Inputs
‘Continuous’ mode activation/deactivation
management with inputs. See the Input/Output
parameters for more details.
Disabled,
enabled
Disabled
‘Continuous’
Mode
‘Continuous’ mode activation/deactivation. If
activated overrides the trigger ‘continuous’ mode
with inputs setting.
Disabled,
enabled
Enabled
The general parameters are managed through the ‘Read General Parameters’
and ‘Write General Parameterscommands as described in protocol technical
manuals where the parameters 1…7 fields with default values are:
1 2 3 4 5 6 7
0xFF 0x48 0x10 0x00 0x00 Filter Time Flags
0xFF 0x48 0x10 0x00 0x00 0x01 0x80
Where:
Parameter Description
Filter Time
Reading management filter time (0 setting is internally overwritten with 1 second):
• Decimal 0 … 99 for time in seconds (0 … 99 seconds);
• Decimal 100 … 199 for time in minutes (0 … 99 minutes).
Flags
Flags. Single bits are dedicated to disable (0 value) or enable (1 value) functions:
• Bit 7: Automatic buzzer management;
• Bit 6: Automatic output 1 management;
• Bit 5: Reading antenna information in Data Request, Queue Request and
Inventory commands;
• Bit 4: Transponder type information in Data Request and Queue Request
commands;
• Bit 3: Not used;
• Bit 2: Trigger ‘continuous’ mode with inputs (see the I/O parameters);
• Bit 1: Not used;
• Bit 0: To disable the ‘continuous’ mode.