Blue Coat SG510 Series, Руководство по установке

Страница: 50 / 110

P/N 231-02833 Blue Coat SG510 Installation Guide page 50
If you choose to use the Setup Wizard, go to “5.1.1.x—To Configure the SG510
Using the Setup Wizard” on page 35.
6
On page 3, enter a console username and a console and enable password. A
default username (
admin
) is already in place—you can change it here.
Usernames and passwords can each be from 1 to 64 characters in length.
Passwords that contain special characters (such as an exclamation point) must
be in quotes.
Figure 2-17: Initial Setup—Page Three
7
( not recommended ) For maximum security, secure the serial port.
The serial port allows you to configure and access the SG510 using a serial
cable. This can pose a security risk because anyone with access to the
appliance can reconfigure the SG510 settings. This optional step sets a
password for the serial console setup, allowing only authorized personnel the
ability to reconfigure the appliance.
---------------------- (page 3 of 5) ---------------------
Press <ESC> at any time to return to the main menu
DIRECTIONS:
The console username, password and enable password are special
administrative credentials which can be used to log in to the comman
line interface or web management interface.
WARNING - The console password and enable password are not defined
The system cannot start up until these are defined.
You must configure the console user account now.
Enter console username [admin]: name123
Enter console password: ”******”
Verify console password: ”******”
Enter enable password: ”******”
Verify enable password: ”******”