Blue Coat SG510 Series, Руководство по установке

Страница: 30 / 110

P/N 231-02833 Blue Coat SG510 Installation Guide page 30
Where to go next
If your SG510 is running 4.2.2.x, complete the procedure described in “4.2.2.x—To
Configure the SG510 Using a Web Browser:” on page 30.
If your SG510 is running 5.1.1.x, complete the procedure described in “5.1.1.x—To
Configure the SG510 Using the Setup Wizard” on page 35.
4.2.2.x—To Configure the SG510 Using a Web Browser:
Before starting this procedure, ensure that you have met all requirements
described in
“Requirements” on page 29.
1
Place the SG510 into the network.
For information on placing the SG510 into the network, see “Placing the SG510
into the Network” on page 28.
2
Power on the SG510.
3
Plug one end of the Ethernet cable into Port 0 on the back of the SG510.
4
Plug the other end of the Ethernet cable into your network.
5
Enter one of the following URLs into your browser (the browser must be on
the same subnet as the SG510 or you must have created a static route to one of
these addresses):
https://10.0.0.254:8083/
https://172.16.0.254:8083/
https://192.168.0.254:8083/
https://192.168.1.254:8083/
Note: If you are using an inline bridging deployment, enter the following
URL into your browser: https://proxysg.bluecoat.com:8083/