Blue Coat SG510 Series, Руководство по установке

Страница: 10 / 110

P/N 231-02833 Blue Coat SG510 Installation Guide page 10
Mounting the SG510 in an Equipment Rack
The Blue Coat SG510 is designed to fit into a standard telco-style or four-post
cabinet style equipment rack.
The SG510 ships with the rack-mounting ears installed.
Rack-Mounting Notes
Read these notes before rack-mounting the SG510.
• Elevated Operating Temperature—If installed in a closed or multi-unit rack
assembly, the operating ambient temperature of the rack environment may be
greater than the ambient room temperature. Therefore, consideration should
be given to installing the equipment in an environment compatible with the
maximum ambient temperature specified by the manufacturer.
• Reduced Air Flow—Installation of the equipment in a rack should be such
that the amount of air flow required for safe operation of the equipment is not
compromised.
• Mechanical Loading—Mounting of the equipment in the rack should be such
that a hazardous condition is not achieved due to uneven mechanical loading.
• Circuit Overloading—Consideration should be given to the connection of the
equipment to the supply circuit and the effect that overloading of the circuits
might have on overcurrent protection and supply wiring. Appropriate
consideration of equipment nameplate ratings should be used when
addressing this concern.
• Earthing (Grounding)—Reliable earthing of rack-mounted equipment should
be maintained. Particular attention should be given to supply connections
other than direct connections to the branch circuit (for example, use of power
strips).
Attach the SG510 to the equipment mounting rack:
1
Position the SG510 into the equipment rack so that the ears of the brackets
align with the holes in the front of the rack.
2
Use equipment-rack screws to mount the SG510 to the equipment rack.
Figure 1-3 shows a SG510 flush-mounted on a Telco equipment rack.