Blue Coat SG510 Series, Руководство по установке

Страница: 41 / 110

P/N 231-02833 Blue Coat SG510 Installation Guide page 41
Figure 2-8: Initial Setup—Page One
5
On page 2, enter a console username and a console and enable password. A
default username (admin) is already in place—you can change it here.
Welcome to the ProxySG Appliance Setup Console
---------------------- (page 1 of 5) ---------------------
Press <ESC> at any time to return to the main menu
DIRECTIONS:
This setup console is used to assign IP addresses to
the ProxySG Appliance. After assigning the IP addresses
you can connect to the command line interface or Web
interface to perform additional management tasks.
If you have a pass through card, you can configure it by
using the bridge name passthru-<slot number>. For
example if the pass through card is at slot 2, the
bridge name would be passthru-2.
In order to create a new bridge, you would have to
1. assign a name to the bridge
2. associate one or more interfaces to the bridge
Configure bridge? Y/N [No] No
Enter interface number to configure [0:0]:
IP address [0.0.0.0]: 10.25.36.47
IP subnet mask [0.0.0.0]: 255.255.255.0
IP gateway [0.0.0.0]: 10.25.36.1
DNS server [0.0.0.0]: 101.52.23.101
You have entered the following IP addresses:
IP address: 10.25.36.47
IP subnet mask: 255.255.255.0
IP gateway: 10.25.36.1
DNS server: 101.52.23.101
Would you like to change any of them? Y/N [No] No