9.1.10
Time bar unit
•
The option includes:
、
、
和
. The smaller the
unit, the larger the zoom rate. You can accurately set the time in the time bar
to playback the record.
•
The time bar is beginning with 0 o'clock when you are setting the
configuration. The time bar zooms in the period of the current playback time
when you are playing the file.
9.1.11
Record type
•
Continuous (green): The NVR will record continuously during the selected time.
•
MD (yellow): The NVR will start recording only if Motion Detection is detected.
Please refer to chapter XXXXX to learn more about Motion detection.
•
Alarm (red): The NVR will start recording only if an alarm events is detected. Please
refer to chapter XXXXX to learn more about Alarm settings.
o
E.g. Internet disconnection, IP conflict, masking alarm, etc.
•
MD&Alarm (blue): The NVR will start recording only if Motion Detection or an Alarm
event is detected.
Note:
In any play mode, the time bar will change once you modify the search type.
9.1.12
Backup
•
Click
, enter the following interface.
•
Select the file(s) you want to backup from the file list. You can check from the
list. Then click the backup button, now you can see the backup menu. System
supports customized path setup. After select or create new folder, click the
Start button to begin the backup operation. The record file(s) will be saved in
the specified folder.
•
Check the file again you can cancel current selection. System max supports to
display 32 files from one channel.
•
After you clip on record file, click Backup button you can save it.
•
For one device, if there is a backup in process, you cannot start a new backup
operation.