8. Live Stream
After device booted up, the system is
in multiple-channel display mode.
The
amount of cameras that can be
registered on the NVR is limited to the
amount of channels from the NVR. It is
not possible to add more than 4
cameras for a 4 channel NVR (e.g. NVR-
40) or 8 cameras for a 8 channel NVR
(e.g. NVR-80).
SN
Icon
Function
1
When current channel is recording, system displays this icon.
2
When motion detection alarm occurs, system displays this icon.
3
When video loss alarm occurs, system displays this icon.
4
When current channel is in monitor lock status, system displays this icon.
Live view drag: If you want to change position of channel 1 and channel 2 when you
are on the live view menu, you can left click mouse in the channel 1 and then drag to
channel 2, release mouse you can switch channel 1 and channel 2 positions.
Use mouse middle button to control window split: You can use mouse middle
button to switch window split amount.
While on live view interface use the mouse right click
to open the shortcut menu:
Window split mode: You can select window amount
and then select channels. For more information refer
to chapter
8.1 Window split mode
PTZ: Opens the PTZ interface. For more information
refer to chapter
7.1.2 Image
Image: Opens image settings, for more information
refer to chapter
7.1.2 Image
Search: Click it to go to Search interface to search and
playback a record file. For more information refer to
chapter
7.1.2 Image
Record control: Enable/disable record channel.
Camera registration: Search and add a remote
device. For more information refer to chapter
7.1.1
Registration
Main menu: Go to system main menu interface.