7.1.1.3 Firmware
It is to upgrade the connected network camera firmware. It includes online upgrade and file
upgrade.
From main menu->setting->camera->remote, the interface is shown as below.
7.1.1.4
Upgrade
Step 1
Download the latest manual for your cameras from Blaupunkt download center:
https://www.blaupunkt.com/en/nc/servicesupport/downloads/
Step 2
Go to your “Downloads” folder and look for the Firmware file. The file Firmware will be
downloaded as a Zip (compressed folder). To unzip the file, open the zipped folder, then
drag the file from the zipped folder to a new location (E.g. to your desktop). Once
extracted the Firmware will be a .bin file.
Step 3
Place the .bin file on a USB stick.
Step 4
Install the USB stick on the NVR USB port located at the back
Step 5
On the NVR click “Select” button and choose the .bin file and click the OK button.
After successful operation, system pops up upgrade successful dialogue box.
Note
If there are too much remote devices, select device type from the drop-down list to
search the remote device you desire.