Region: Click select button, the interface is shown as bellow.
Here you can set motion detection zone. There are four zones for you to set. Please select a zone
first and then left drag the mouse to select a zone. The corresponding colour zone displays
different detection zone. You can click Fn button to switch between the arm mode and disarm
mode. In arm mode, you can click the direction buttons to move the green rectangle to set the
motion detection zone. After you completed the setup, please click ENTER button to exit current
setup. Do remember click save button to save current setup. If you click ESC button to exit the
region setup interface system will not save your zone setup.
Period: Click set button, you can see an interface is shown as bellow.
Here you can set motion detect period. System only enables motion detect operation in the
specified periods. It is not for video loss or the tampering. There are two ways for you to set
periods. Please note system only supports 6 periods in one day.
Select icon
of several dates, all checked items can be edited together. Now the
icon is shown as
. Click
to delete a record type from one period.
Click button
after one date or a holiday, you can see an interface shown below.