24
A-QAMOS-4CI
Part N
o
: 5102.81
SAT-TV Transmodulator
DVB-S/ -S2 (8x QPSK/ 8PSK)
→
4x CI
→
DVB-C (8x QAM)
A
LINE
7.3.9 Menu ”Level”
With the top box, the loop through output (loop) is enabled or disabled. If enabled, the underlying selection of the nominal level for
all 8 channels may be set in the range from 62 ... 82 dBµV. If the loop is disabled, the output level of the 8 channels may be set in the
range of 74 ... 94 dBµV. Below it each channel can be set individually with an offset of +3 ... -6 dB in 0.5 dB steps. The three lower
buttons are used to simplify the offset level setting if you want to perform same adjusting for all 8 channels. With the left button the
offset for all 8 channels is increased by 0.5 dB, decreased with the right button by 0.5 dB. The offset is set for all 8 channels to 0 dB
with the middle button.
7.3.10 Menu ”Status”
It presents an overview of the status of the various components per channel, which is updated every 5 seconds. It lists only the cur-
rent values, the naming of the parameter appears in the help box in the lower part of the user interface or in the status bar of the brow-
ser (as adopted configuration), if you hover the mouse cursor above the parameter.
