13
A-QAMOS-4CI
Part N
o
: 5102.81
SAT-TV Transmodulator
DVB-S/ -S2 (8x QPSK/ 8PSK)
→
4x CI
→
DVB-C (8x QAM)
A
LINE
7.3.3 Menu ”CI setup”
In this menu there is the configuration of the Common Interfaces of the device. The A-QAMOS-4CI has 2 double-CI slots for a maxi-
mum of 4 CA modules. The modules can be cascaded, i.e. a transport stream can be routed through one up to a maximum of every
4 modules for decryption of services. For this reason, initially there is the decryption configuration, i.e. it determines which transport
stream is passed through that module. In principle, set the transponder with the services to be decrypted on the channels 1...4, since
only these can be routed by the CA modules. First you select the pathway of transport streams of the 4 channels. The first selection
point is, channel 1 to be passed through module 1, ..., channel 4 to be passed through module 4. Next, you can route channel 1
through module 1 and than through module 2, channel 3 through module 3 and channel 4 through module 4 and channel 2 through
no module. Correspondingly are the other possibilities. For better illustration of the signal path it is displayed on the right side of the
select box graphically. Did you choose the right setting, so this is to confirm by pressing the “Send“ button that you can perform all
other settings for each module.
After the selection above one can make the multi-decryption settings for each signal path through one or more CA modules, if neces-
sary. For this purpose the “Multidec“ button is to press and leads to the following menu:
